main logo

Display In Use

Los 10 mejores productos de mayo de 2025
Última actualización: 22 de mayo de 2025
Waveshare
Waveshare
Waveshare 7 Inch Display for Raspberry Pi 4 Capacitive Touchscreen HDMI LCD (C) 1024x600 Resolution IPS with 170° View Angle Support All Raspberry Pi/Windows 10/8.1/8/7 PC Monitor
Envío gratis
star

85

CALIDAD FIABLE

VER EN AMAZON
Amazon.es
#5

  • 7inch IPS screen, 1024x600 hardware resolution; Capacitive touch control;Backlight can be turned off to lower power consumption
  • Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers; When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free; When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
  • Note:Please set the config.txt file by adding [hdmi_drive=1] into the end of code if you connect it with raspberry pi. (like manual in picture)Otherwise the LCD could not work properly.
  • Note:If the LCD work in abnormal states for long time, it may be broken if you don't set the config.txt file at the beginning.After setting config file,please power off the screen and put it aside for a few hours to avoid the flickers.
  • Note: There is a protective cover on the screen which may remain the scraches after we do the touch test with testing pen,you can peel it off from the green tape on the edge; to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable; BB Black: HDMI cable
  • 59,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Envío gratis
star

81

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#6

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 69,99 € EN AMAZON