Esp32 Display Touch
Los 10 mejores productos de julio de 2025
Última actualización:
7 de julio de 2025
Waveshare
Waveshare ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-bit LX7 Dual-Core Processor, 368x448, Accelerometer&Gyroscope Sensor, ESP32 with Display, Support 3.7V Li Battery(Not Included)
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use
Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development
Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery. Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, Support 3.7V Lithium battery(NOT Included)
Reserved pads of 7 x GPIO, 1 x I2C, 1 x UART, and 1 x USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
41,99 € EN AMAZON
Vegena
Vegena ESP32 Placa de Desarrollo, ESP32 Display, Pantalla ESP32, 240x320 SPI TFT Touchscreen Monitor Compatible con LVGL Tablero de microcontrolador
Envío gratis
97
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
CPU de doble núcleo, frecuencia de reloj de hasta 240 MHZ, integra periféricos de recursos ricos, SDIO, SPI, UART de alta velocidad y otras funciones, y admite descarga automática.
El ESP32 Display aprovecha al máximo las ventajas de desarrollo de Internet de las cosas y es una verdadera herramienta de desarrollo de Internet de las cosas. La pantalla de visualización es controlable. El ESP32 Display se puede utilizar para control remoto de aplicaciones, recopilación remota de datos ambientales, control remoto y fusión de datos, configuración remota de parámetros y otras aplicaciones de desarrollo por lotes.
La pantalla del ESP32 Display utiliza tecnología táctil resistiva y está equipada con un lápiz táctil resistivo, lo que hace que el uso de la pantalla sea más flexible.
ESP32 Display tiene una interfaz de demostración LVGL integrada y un ejemplo Ar-duino, plug and play.
Los ESP32 Displays incluyen transmisión de imágenes de dispositivos inteligentes domésticos, monitoreo inalámbrico, detección de códigos QR inalámbricos para agricultura inteligente, señales de sistemas de posicionamiento inalámbrico y otras aplicaciones de IoT.
20,88 € EN AMAZON
Waveshare
Waveshare ESP32-S3 2inch Capacitive Touch Display Development Board, 240x320, IPS, 32-bit LX7 2-Core Processor, Up To 240MHz Frequency, Support WiFi BT, Support OV5640 5MP Camera Module(Not Included)
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna
Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard 2inch capacitive touch display for clear color picture display, 240 x 320 resolution, 262K color
Built-in ST7789T3 display driver and CST816D capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources
Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope).Onboard 3.7V MX1.25 Lithium battery recharge/discharge header. Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use
Onboard TF card slot for external TF card storage of pictures or files. Adapting 22 x GPIO pins for flexible configuration of pin function. Onboard camera interface, compatible with mainstream cameras such as OV2640(NOT Included) and OV5640(NOT Included) for image and video acquisition
27,99 € EN AMAZON
diymore
Diymore para ESP32-S3 Placa de Desarrollo con Pantalla Táctil de 3.5 Pulgadas WiFi Bluetooth,320 * 480 de Resolución para ESP32 Módulo de Visualización de Pantalla con Ranura para Tarjeta TF
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Procesador de doble núcleo: placa de desarrollo basada en controlador ESP32 S3, CPU de doble núcleo, frecuencia de reloj de hasta 240 MHz, integrada con ricos recursos periféricos, DIO de alta velocidad, SPI, UART y otras funciones, soporte para descarga automática.
Control remoto: se puede utilizar para control remoto de aplicaciones, recopilación de datos remotos de entorno, fusión de datos remota, configuración de parámetros remotos y otras aplicaciones de desarrollo de IoT.
Pantalla táctil capacitiva de 3,5 pulgadas: pantalla táctil capacitiva integrada de 3,5 pulgadas, resolución de 320 × 480, color 65 K. Colores ricos y excelentes efectos visuales
Múltiples interfaces periféricas: múltiples interfaces para facilitar la expansión de la memoria, conveniente para los usuarios almacenar y leer más datos y programas. Ricos recursos periféricos que admiten una variedad de puertos periféricos para satisfacer las necesidades de un desarrollo complejo.
【Soporte de desarrollo rápido】Programas de muestra preinstalados para promover un rápido desarrollo secundario y acortar el ciclo de desarrollo. Puede personalizar el módulo de aplicación y la interfaz para crear una interfaz de aplicación que se adapte a sus necesidades.
30,99 € EN AMAZON
Waveshare
Waveshare ESP32-C6 1.47inch Touch Display Development Board(Without pinheader), 172x320 Resolution, 262K Display Color, Supports Wi-Fi 6 / BLE 5, 160MHz RISC-V Processor
Envío gratis
85
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
ESP32-C6-Touch-LCD-1.47(Standard version, without pinheader) uses ESP32-C6FH8 chip with 2.4GHz WiFi 6 and BT BLE 5 support, integrates 8MB Flash, Onboard 1.47inch IPS display can smoothly run GUI programs such as LVGL. It is suitable for the quick development of the HMI and other ESP32-C6 applications
Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz, and a low-power 32-bit RISC-V processor with clock speed up to 20MHz
Supports 2.4GHz Wi-Fi 6 (802.11 ax/b/g/n) and BT 5 (LE), with onboard antenna. Built-in 320KB ROM, 512KB HP SRAM, and 16KB LP SRAM, integrates 8MB Flash
Onboard 1.47inch capacitive touch LCD display, 172x320 resolution, 262K color. Adapting multiple IO interfaces, supports full-speed USB standard
Onboard TF card slot for external TF card storage of pictures or files. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
22,99 € EN AMAZON
Waveshare
Waveshare ESP32-S3 1.69inch Touch Display Development Board, 240×280 Pixels, 262K Color, Compact Size, Micro LCD Display with ESP32-S3, Accelerometer and Gyroscope Sensor
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna
Type-C connector, keeps it up to date, easier to use. Onboard 1.69inch 240X280 pixels 262K capacitive touch display for clear color pictures. Built-in ST7789V2 display driver and CST816T capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources
Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip with reserved SH1.0 RTC battery header (supports charging) for RTC function requirement
Onboard RST, BOOT and a programmable PWM button for easy custom function development. Onboard 3.7V MX1.25 lithium battery recharge/discharge header. High touch screen transmittance, fast response and long lifetime
Reserved pads of 4 x GPIO, I2C, and UART interface, for connecting peripherals and debugging. Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
32,99 € EN AMAZON
diymore
diymore Para pantalla ESP32, para placa de desarrollo ESP32 con WiFi Bluetooth, pantalla LCD de 2,8 pulgadas 240 x 320, módulo TFT inteligente, pantalla táctil de alta velocidad, conectividad IoT
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【Para ESP32 con pantalla táctil】 El ESP32 dispone de una pantalla a color de 2,8 pulgadas con resolución de 240 x 320, cable Dupont y mango. Conector tipo C estándar para una fácil descarga de programas y alimentación. Con ranura para tarjeta Micro TF, conveniente para ampliar la memoria.
【Multifunción para ESP32】Soporte altavoz externo, reproducción de audio, viene con indicador RGB tricolor, muestra el estado de los ricos. Soporte de batería de litio externa, ligero y portátil. El circuito de gestión de carga de la batería asegura la carga y descarga segura de la batería.
Aplicaciones multipropósito de IoT: esta pantalla ESP32 libera el potencial de Internet de las cosas, con una pantalla controlable que es perfecta para el control remoto de aplicaciones, consulta remota de datos ambientales, fusión de datos, configuración de parámetros y otras aplicaciones de desarrollo de IoT.
【Para pantalla ESP32】Admite una variedad de interfaces como UART/SPI/I2C/PWM/ADC/DAC, memoria flash integrada, tarjeta TF, múltiples modos de suspensión, LwIP integrado y FreeRTOS, etc. para un fácil desarrollo secundario y personalización.
Altamente personalizable: soporta múltiples entornos de desarrollo, Arduino IDE, MicroPython, Scratch 3.0, Espressif IDF, PlatformIO. apoya el desarrollo LVGL GUL, proporciona múltiples elementos gráficos y controles, hacen que el diseño de la interfaz de usuario más flexible. Admite el desarrollo de una interfaz hombre-máquina (HMI) para una fácil interacción hombre-máquina. Proporciona ricos programas de ejemplo para un aprendizaje fácil.
19,99 € EN AMAZON
Waveshare
Waveshare ESP32-S3 7inch Capacitive Touch LCD Development Board, ESP32 with Display, 800×480, 5-Point Touch, Up to 240MHz Frequency, Supports WiFi & Bluetooth, for Esphome/Home Assistant Projects
Envío gratis
77
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
[Dual-core Processor] Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
[Onboard Antenna] Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash
[7inch Capacitive Touch Display] Onboard 7inch capacitive touch display, 800×480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
[Various Peripheral Interfaces] Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications. Supports flexible clock, module power supply independent setting, and other control to realize low power consumption in different scenarios
[Supports Flexible Clock] Module power supply independent setting, and other control to realize low power consumption in different scenarios
53,99 € EN AMAZON
Waveshare
Waveshare ESP32-S3 2.8inch Capacitive Touch Display Development Board, 240x320, IPS, 5-Point Touch, 32-bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & BT, Onboard Antenna
Envío gratis
75
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
Onboard 2.8inch capacitive touch display, 240×320 resolution, 262K color. Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
37,99 € EN AMAZON
Waveshare
Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board Type B, 800×480, 5-Point Touch, 32-bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & BT, with Onboard Antenna
Envío gratis
68
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Supports passive and active digital input, with bi-directional optocoupler isolation
Onboard 4.3inch capacitive touch display, 800x480 resolution, 65K color. Onboard voltage regulator, supports 7~36V wide range power supply
Onboard RTC chip and rechargeable battery holder to ensure time data is not lost when power loss. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc. Onboard LED indicators for indicating the power and battery recharging status
Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios
53,99 € EN AMAZON
esp32 touch
touch display
display esp32
esp32 display
esp32 lcd display
esp32 lora display
esp32 s3 display
touch screen display
esp32 touch screen
#1 GANADOR
