Raspberry Pi Computer Module 5
Los 10 mejores productos de mayo de 2025
Última actualización:
22 de mayo de 2025
Waveshare
Waveshare CM5 Pi Compute Module 5,Comes with an Official Raspberry Pi CM5108032 (with Wireless, 8GB RAM, 32GB eMMC Flash), an Antenna Kit and a HEATSINK
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
8GB RAM, 32GB eMMC Flash, with WIFI; Raspberry Pi Compute Module 5 is a system on module (SoM) that delivers the power of Raspberry Pi 5 in a compact form factor, integrates a quad-core Arm Cortex-A76 processor, providing a variety of RAM and eMMC flash options, supports power circuitry and a rich set of interfaces.
Compute Module 5 enables you to leverage Raspberry Pi 5's powerful hardware and optimised software stack in your own custom systems and form factors.
Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance More options for RAM (2GB / 4GB / 8GB / 16GB) More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
Faster eMMC Flash storage, up to 200 Mbps data rate Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications Adopts B to B connectors, most compatible with Compute Module 4
Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules; Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
139,99 € EN AMAZON
Waveshare
Waveshare CM5 Pi Compute Module 5,Comes with an Official Raspberry Pi CM5108000 (with Wireless, 8GB RAM, 0GB eMMC Flash), an Antenna Kit and a HEATSINK
Envío gratis
97
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
8GB RAM, 0GB eMMC Flash, with WIFI
Raspberry Pi Compute Module 5 is a system on module (SoM) that delivers the power of Raspberry Pi 5 in a compact form factor, integrates a quad-core Arm Cortex-A76 processor, providing a variety of RAM and eMMC flash options, supports power circuitry and a rich set of interfaces.
Compute Module 5 enables you to leverage Raspberry Pi 5's powerful hardware and optimised software stack in your own custom systems and form factors. Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance More options for RAM (2GB / 4GB / 8GB / 16GB) More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
Faster eMMC Flash storage, up to 200 Mbps data rate Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications Adopts B to B connectors, most compatible with Compute Module 4
Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
128,99 € EN AMAZON
Waveshare
Waveshare CM5 Pi Compute Module 5,Comes with an Official Raspberry Pi CM5116000 (with Wireless, 16GB RAM, 0GB (Lite) eMMC Flash), an Antenna Kit and a HEATSINK
93
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
16GB RAM, 0GB (Lite) eMMC Flash, with WIFI Raspberry Pi Compute Module 5 is a system on module (SoM) that delivers the power of Raspberry Pi 5 in a compact form factor, integrates a quad-core Arm Cortex-A76 processor, providing a variety of RAM and eMMC flash options, supports power circuitry and a rich set of interfaces.
Compute Module 5 enables you to leverage Raspberry Pi 5's powerful hardware and optimised software stack in your own custom systems and form factors.
Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance More options for RAM (2GB / 4GB / 8GB / 16GB) More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
Faster eMMC Flash storage, up to 200 Mbps data rate Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications Adopts B to B connectors, most compatible with Compute Module 4
Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules; Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
175,99 € EN AMAZON
Waveshare
Waveshare Compute Module 5 IO Board, Compatible with All Variants of Raspberry Pi CM5, with PoE Feature, Bundle with PoE Base Board + Case + Power Supply Adapter
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Standard CM5 socket and Raspberry Pi 40PIN GPIO header suitable for all variants of Compute Module 5
Providing both network connection and power supply for your Raspberry Pi in one cable
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive
ONboard Connectors Including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot.each cut-out is completely aligned with the connector
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
69,99 € EN AMAZON
Waveshare
CM5 Waveshare Pi Compute Module 5 CM5104032 (with WiFi Module, 4GB RAM, 32GB Flash eMMC), Raspberry Pi Computing Module Core Board, Also Comes with an Antenna and a Heatsink (3 Items)
Envío gratis
85
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
The Raspberry Pi CM5104032 ( CM5 module ) is a System-on-Module ( SoM ) with a new CPU upgrade to the BCM2712, a quad-core Cortex-A76 64-bit processor for more powerful performance
4GB of RAM, 32GB of eMMC flash memory (eMMC flash memory is faster with transfer rates up to 200 Mbps)
Dual-band (2.4GHz/5.0GHz) IEEE 802.11b/g/n/ac wireless WiFi and BT5.0/BLE module on board, support IEEE 1588 Gigabit Ethernet, suitable for network application development
Supports power supply circuit and rich interfaces, adopts B to B connector design, mostly compatible with CM4
Comes with PCIe interface for flexible expansion of related modules. On-board PCB antenna and external antenna can be accessed, more suitable for industrial applications
113,99 € EN AMAZON
Waveshare
Waveshare Compute Module 5 IO Board, Compatible with All Variants of Raspberry Pi CM5, with PoE Feature, Single Board Only
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
Standard CM5 socket and Raspberry Pi 40PIN GPIO header, suitable for all variants of Compute Module 5
Providing both network connection and power supply for your Raspberry Pi in one cable
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive
Onboard Connectors Including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot.each cut-out is completely aligned with the connector
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
46,99 € EN AMAZON
Waveshare
Waveshare Nano Base Board (B) For Raspberry Pi Compute Module 5, Same Size As The CM5
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
As the mini IO board of the Raspberry Pi Compute Module 5, CM5-NANO-A is a baseboard that can be used with the Raspberry Pi Compute Module 5. With powerful features integrated into a compact design, it is only the size of a CM5 and has interfaces including USB 3.2 Gen1, HDMI, audio, Ethernet port, etc.
Onboard default USB 3.2 Gen1 port.Type C can be used as a USB SLAVE interface to flash images.
The onboard BOOT button, you can press the BOOT button before powering on, and connect to the computer through Type C to let the device enter the flashing mode
Do not connect other devices when using Type C to flash. Insufficient power supply for burning will cause the device to be unrecognized
USB TYPE A interface maximum power output 2A. It is forbidden to unplug and unplug any device other than USB when it is charged
27,99 € EN AMAZON
Waveshare
Waveshare Pi Compute Module 5 CM5108016 (with WiFi Module, 8GB RAM, 16GB Flash eMMC), Raspberry Pi CM5 Computing Module Core Board, Also Comes with an Antenna and a Heatsink (3 Items)
Envío gratis
77
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
The Raspberry Pi CM5108016 ( CM5 module ) is a System-on-Module ( SoM ) with a new CPU upgrade to the BCM2712, a quad-core Cortex-A76 64-bit processor for more powerful performance
8GB of RAM, 16GB of eMMC flash memory (eMMC flash memory is faster with transfer rates up to 200 Mbps)
Dual-band (2.4GHz/5.0GHz) IEEE 802.11b/g/n/ac wireless WiFi and BT5.0/BLE module on board, support IEEE 1588 Gigabit Ethernet, suitable for network application development
Supports power supply circuit and rich interfaces, adopts B to B connector design, mostly compatible with CM4
Comes with PCIe interface for flexible expansion of related modules. On-board PCB antenna and external antenna can be accessed, more suitable for industrial applications
125,99 € EN AMAZON
Waveshare
Waveshare Mini Base Board (B) Designed For Raspberry Pi Compute Module 5, Onboard EEPROM & Encryption Chip, Suitable For Evaluating The Raspberry Pi CM5 Or Being Integrated Into End Products
Envío gratis
71
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
As the IO board of the Raspberry Pi Compute Module 5, CM5-IO-BASE-B is a baseboard that can be used with the Raspberry Pi Compute Module 5. With powerful features are integrated into a compact design, it is only the size of a bank card. It comes with two USB3.2 Gen1 ports and two USB2.0 ports onboard, making it convenient for users.
Type C can be used as a USB SLAVE interface to flash images. The USB ports have a total maximum power output of 2A. Onboard default 2 USB 3.2 Gen1 ports
Supports 4 screens to display different contents, adds MIPI DSI driver, regardless of whether a screen is connected, the system will default to connect, the screen will display in split-screen mode (related to the system version)
The onboard BOOT button, you can press the BOOT button before powering on, and connect to the computer through Type C to let the device enter the flashing mode
Do not plug or unplug any device other than USB and HDMI when the device is powered on. Do not connect other devices when using Type C to flash. Insufficient power supply for burning will cause the device to be unrecognized
34,99 € EN AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
65
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € EN AMAZON
raspberry pi computer module
raspberry pi 5
raspberry pi computer module 4
raspberry pi computer
pantalla raspberry pi 5
raspberry pi 5 display
refrigerador raspberry pi 5
raspberry pi 5 retro
raspberry pi computer module 4 cm4
nvme raspberry pi 5