Raspberry Pi Ups
Los 10 mejores productos de mayo de 2025
Última actualización:
21 de mayo de 2025
Waveshare
Waveshare UPS Hat (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (Not Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
46,99 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-Compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,89 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 UPS (X1202), 4-Cell 18650 UPS (MAX 5.1V 5A Output) with Wide 6-18V Input | Auto Power On | Safe Shutdown | Power Loss Detection
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1202 is designed to be attached on bottom, enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A (Recommend 12V 5A 60W PSU ASIN: B0BD81W6SN); OR power via USB-C port of X1202: 5Vdc 5A via USB Type-C (Recommended 5V 5A USB-C power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1202 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case(NOT included)】Refer to X1202-C1 (ASIN: B0D4ZBXGSH)
60,89 € EN AMAZON
Waveshare
Waveshare UPS Hat (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Envío gratis
88
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards Batteries warning indicators, easy to check if the battery is connected correctly
31,99 € EN AMAZON
Waveshare
Waveshare Uninterruptible Power Supply UPS Module Supports Charging and Power Output at The Same Time 3S & 5V 5A Output
Envío gratis
84
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Regulador integrado de 5 V, corriente de salida continua de hasta 5 A, fuente de alimentación más suficiente para Raspberry Pi y Jetson Nano. Módulo de fuente de alimentación ininterrumpida 3S.
Admite carga y salida de energía al mismo tiempo, salida 3S * y 5V 5A. Si la fuente de alimentación externa no está disponible, mantiene el sistema funcionando sin ningún problema.
Adaptación de varias interfaces mediante cables, fácil de integrar en robots móviles o equipos de control industrial. Comunicación por bus I2C, monitorizando el voltaje, la corriente y la potencia de las baterías en tiempo real.
Indicadores de advertencia de batería, fáciles de verificar si la batería está conectada correctamente. (Advertencia: NO conecte el cargador si el indicador se enciende, de lo contrario se dañará el circuito de protección).
Monitoreo en tiempo real, monitoreo del voltaje, corriente y potencia de las baterías a través de I2C. Diseño de circuito seguro y estable. Circuitos de protección de múltiples baterías: circuitos de protección para sobrecarga/descarga, sobrecorriente, cortocircuito e inversión. Junto con la función de carga de ecualización, más seguro y estable."
36,99 € EN AMAZON
Geekworm
Geekworm Raspberry Pi UPS, X728 V2.3 (Max 5.1V 6A) 18650 UPS with Power Loss Detection & Auto On & Safe Shutdown & Buzzer for Raspberry Pi 4 8GB/4GB/2GB/3B+/3B/2B
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
【Function】X728 V2.3 provides max 5.1V 6000mA Power Backup, intelligent and safe power management, safe shutdown, auto power-on, full poweroff from software, RTC real- time clock, and a buzzer
【Support External Battery Holder】Can connect external battery holder to increase battery capacity
【How to Power】Power via X728 USB-C port: 5Vdc ±5%, ≥3A; Via X728 DC power jack : 5Vdc ±5%, ≥4A; Recommend Geekworm 20W 5V 4A USB C PSU (ASIN: B09J4V3RYK)
【Packing List】 X728 V2.3 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi motherboard or batteries)
【Matching Case (Not included)】Refer to X728-C1 Metal Case (ASIN: B09Z6CC262), or N300 Case (ASIN: B07WZXPR2W), P165-A (ASIN: B089CK12C6), P165-B (ASIN: B08N617L1J)
【Other Geekworm UPS Recommended】X703 ultra-compact ups (ASIN: B09HZXDN8S); X708 UPS (ASIN: B08DJ5YZ7M)
51,89 € EN AMAZON
GeeekPi
GeeekPi Raspberry Pi UPS V5 Power Supply Uninterruptible UPS Hat,Support 18650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
UPS Plus es una nueva generación de módulos de administración de energía UPS que admiten actualizaciones de firmware OTA y admiten RTC a bordo.
Hay dos chips INA219 a bordo para detectar el voltaje de la batería y la salida de voltaje de UPS Plus a Raspberry Pi.
Compatible con Raspberry Pi 5 / 4B / 3B+ / 3B / 2B / B+ / B / A+ / A
El paquete incluye: 1 x UPS Plus para Raspberry Pi, 4 x M2.5 Columna de cobre, 4 x M2.5 Tornillos, 4 x M2.5 Varilla de Cobre Larga, 4 x Tuercas M2.5, 1 x Placa de acrílico, 1 x Instrucciones, Tenga en cuenta que las baterías 18650 no están incluidas.
Para obtener información sobre el uso, consulte wiki.52pi.com/index.php?title=EP-0136
45,99 € EN AMAZON
GeeekPi
GeeekPi Raspberry Pi Pico/Pico W UPS Power Supply Uninterruptible UPS Hat, Power Bank Power Management Expansion Board for Raspberry Pi Pico/Pico W
Envío gratis
76
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Esta es una fuente de alimentación portátil para Raspberry Pi Pico;Plug & Play
Solo es compatible con la batería de litio 18650
La potencia restante de la batería se puede leer a partir de los 4 indicadores LED. También puede leer la información de voltaje y corriente de la batería conectando el cable USB a TTL a los pines del puerto serie del inversor.
El indicador de carga durante la carga es muy intuitivo, y cuando la batería está completamente cargada, deja de cargarse y el indicador de espera en el panel se enciende.
Todos los GPIO están a la cabeza y proporcionan serigrafías claras que son muy convenientes para los experimentos Pico.
Contenido del paquete: 1 UPS para Raspberry Pi Pico
12,99 € EN AMAZON
Geekworm
Geekworm X1206 4-Cell 5V UPS Shiled for Raspberry Pi 5, Max 5.1V 6A Output|Wide 9-18V Input|Auto Power On|Safe Shutdown|Power Loss Detection
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Compatibility: UPS compatible con Raspberry Pi 5 16GB/8GB/4GB; Modelo: X1206; Matching Case is X1206-C1
Function: X1206 provides max 5.1V 6000mA Power Backup, Smart and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
Cómo alimentar (3 opciones): 1. 5Vdc via USB Type-C of X1206; 2. 9-18Vdc via DC5521 barril of X1206; 3. 9-18 VDC via XH2.54 conector de X1206 (no incluye cable de alimentación XH2.54)
Batería compatible con 4 celdas 21700: longitud máxima de la batería 70,5 mm, diámetro máximo de 21,1 mm. (No incluye pilas, por favor prepare usted mismo)
Lista de embalaje: 1 x X1206 5V UPS Shield, 1 x Screws Pack (no incluye Pi 5, pilas o adaptador de alimentación)
68,00 € EN AMAZON
Geekworm
Geekworm X306 V1.3 Ultra-Thin UPS Shield for Raspberry Pi Zero 2 W
Envío gratis
69
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
【Update】Updated to V1.3 in July 2024. 1. Only compatible with Raspberry Pi Zero 2W；2. Removed 3 standard USB-A 2.0 ports；3. Removed 4-pin header for external power switch and always-on power option; 4. Smaller size, simplified use
【Compatibility】Compatible with Raspberry Pi Zero 2 W ONLY
【Ultra-thin UPS】Ideal uninterruptible power supply (USP) solution for Raspberry Pi Zero W/2 W, max. 5.1 V, 4000 mA power backup with single cell battery holder
【How to Power】Power via USB-C 5V Power In port of X306; 5Vdc +/-5% , ≥3A; Recommended Geekworm 5V 4A 20W USB-C power supply(ASIN: B09J4V3RYK)
【How to cool】Recommended for use with C296 aluminium heat sink (ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W.
【Packing List】1 x X306 Expansion Board; 4 x M2.5x5mm Screws; Note: not inlcude Raspberry Pi board, battery, GPIO Header & power adapter.
28,89 € EN AMAZON
ups raspberry pi
raspberry pi ups hat
raspberry ups
ups raspberry pi 4
ups para raspberry pi
ups raspberry pi 5
raspberry pi
ups para raspberry pi 4
raspberry pi 8
gsm raspberry pi
#1 GANADOR
