main logo

Sim7600e-h

Los 10 mejores productos de mayo de 2025
Última actualización: 31 de mayo de 2025
Waveshare
Waveshare
Waveshare SIM7600E-H 4G-Module, Used for Windows/Linux Dial-up Internet Access, Cloud Platform Communication, GNSS Locating, Compatible with Raspberry Pi/Jetson Nano/ESP32/STM32 Programming Platforms
Envío gratis
star

98

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#1 GANADOR

  • Typical application: Used for Medical and health, smart payment, public network intercom, environmental monitoring, energy monitoring, fleet management, smart industry, smart agriculture. With 3× IPEX antenna connector, comes with 2× yellow pin header and FPC antenna. Applicable regions: Europe/Southeast Asia/West Asia/Africa/China/Korea
  • Compatible with 2G/3G/4G network with global support. Supports dial-up, telephone calls, SMS/TCP/UDP/MQTT/DTMF/HTTP/FTP, etc. Supports GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. Onboard USB and UART interface, for dial-up Internet access, cloud platform communication, GNSS positioning, etc
  • Castellated holes with immersion gold design, small size, easy to integrate into the device by soldering directly or inserting via the pin header. Adapting USB/UART/SIM card/GPIO control pins, easy to develop and debug, better expansibility. Built-in voltage translator, compatible with 3.3V/5V MCU motherboards such as STM32/ESP32
  • Supports multiple power supply methods: USB port, VIN pin, and VBAT pin (for 3.7V lithium battery). Supports 5~26V wide voltage power supply and 3A high current output, to prevent the module from dropping and restarting due to the large instantaneous power consumption, more stable and reliable in industrial use
  • Onboard Nano SIM card slot, supports 1.8V and 3V SIM cards, near the edge of the board design, for easy accessing SIM card. Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)
  • 67,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Envío gratis
star

97

CALIDAD SUPERIOR

VER EN AMAZON
Amazon.es
#2

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS, , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 85,89 € EN AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H-PCIE SIMCom Original 4G LTE Cat-4 Module Support Global Coverage GNSS/LTE-TDD/LTE-FDD/HSPA+/gsm/GPRS/Edge with Mini-PCIe Connector
Envío gratis
star

95

CALIDAD EXCELENTE

VER EN AMAZON
Amazon.es
#3

  • Mini-PCIE interface with strong compatibility
  • Multi-constellation GNSS receiver support
  • Suitable for LTE, UMTS and GSM networks with global coverage
  • Abundant software functions: FOTA, LBS, TLS, VoLTE
  • AT commands of the SIM7600-H-PCIE series are compatible with the SIM7500/SIM7600 series modules
  • 64,99 € EN AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 4G Hat for Raspberry Pi, Based on Waveshare SIM7600E-H, Enabling LTE Cat-4 4G/3G/2G Communication & GNSS Positioning, Compatible with Raspberry Pi Series Boards/Jetson Nano
Envío gratis
star

90

CALIDAD DISTINGUIDA

VER EN AMAZON
Amazon.es
#4

  • Equipped with standard Pi 40PIN GPIO expansion head, and compatible with Raspberry Pi series boards/Jetson Nano. Support dialing, telephone calling, SMS/TCP/UDP/DTMF/HTTP/FTP, etc
  • Support GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. The onboard USB interface is used to test AT commands, obtain GPS positioning data, etc. On board 2102 USB to UART converter for serial debugging. Disconnect the UART control pin for connecting STM32 and other motherboards
  • SIM card slot, supporting 1.8V/3V SIM card. TF card slot, used to store files, messages and other data. Car audio jack and audio decoder for making calls. 2 LED indicators, easy to monitor operation status
  • On board voltage converter, the working voltage can be configured as 3.3V or 5V through jumpers. Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT command (3GPP TS 27.007, 27.005 and V.25TER command set)
  • Support SIM application kit: SAT Class 3, GSM 11.14 Release 99, USAT. Provide online development resources and manuals (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant manual
  • 75,99 € EN AMAZON
Waveshare
Waveshare
Waveshare SIM7600E-H 4G DONGLE with Antenna for Industrial Grade 4G Communication and GNSS Positioning Peripheral
Envío gratis
star

83

CALIDAD FIABLE

VER EN AMAZON
Amazon.es
#5

  • This is an industrial grade 4G dongle, which features up to 150Mbps downlink rate and 50Mbps uplink rate, supports operating systems including Windows/Linux. By simply connecting it to laptop, PC, Raspberry Pi, drone, industrial computer, or other IoT host device, it is easy to use 4G network connection on the go.
  • Supports 4G/3G/2G Communication For Europe / The Middle East / Africa / South Korea / Thailand...
  • Working With Laptop / Raspberry Pi / Industrial Computer... Up To 150Mbps Downlink And 50Mbps Uplink*
  • Supports Windows/Linux:Just plug it into USB port, go through some driver installation and simple configuration, the high speed 4G network connection would be ready to use
  • Supports USB/UART Communication Interfaces,Supports TCP/UDP/FTP/FTPS/HTTP/HTTPS Communication Protocols,Supports GPS / Beidou / GLONASS / GALILEO / QZSS Positioning
  • 83,99 € EN AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H-M.2 SIMCom Original 4G LTE Cat-4 Module Global Coverage with GNSS Support M.2 B Key Connector LTE-TDD LTE-FDD HSPA+ gsm GPRS Edge
Envío gratis
star

81

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#6

  • M.2 interface with strong compatibility. Multi-constellation GNSS receiver support. Suitable for LTE, UMTS and GSM networks with global coverage. Abundant software functions: FOTA, LBS, TLS. AT commands of the SIM7600-H-M2 series are compatible with the SIM7500/SIM7600 series modules.
  • The SIM7600G-H-M.2 series is the LTE Cat 4 module which supports wireless communication modes of LTE-TDD/ LTE-FDD/HSPA+/GSM/GPRS/EDGE etc. It supports maximum 150Mbps downlink rate and 50Mbps uplink rate.
  • The SIM7600G-H-M.2 series adopts M.2 form factor and consists of a SIM7600-H series module and a M.2 adapter board. It is easy for customers to integrate.
  • The SIM7600G-H-M.2 series integrates multiple satellite high accuracy positioning GNSS systems, with multiple built-in network protocols, supports drivers for main operation systems (USB driver for Windows, Linux and Android etc.) and software function, AT commands are compatible with SIM7500/SIM7600 series modules.
  • Meanwhile the SIM7600G-H-M.2 series integrates main industrial standard interfaces, with powerful expansibility, including abundant interfaces such as UART, USB, GPIO, which is suitable for main IoT applications such as telematics, surveillance devices, CPE, industrial routers, and remote diagnostics etc.
  • 58,99 € EN AMAZON
Waveshare
Waveshare
4G/3G/2G/GSM/GPRS/GNSS Hat Based SIM7600E-H for Raspberry Pi/Jetson Nano Support LTE CAT4 for Downlink Data Transfer/4G High-Speed Connection/Telephone Call/Sending SMS
Envío gratis
star

79

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#7

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc; Supports GPS, BeiDou, Glonass, LBS base station positioning; Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on; Onboard CP2102 USB to UART converter, for serial debugging; Breakout UART control pins, to connect with host boards like Arduino/STM32
  • Onboard audio jack and audio decoder for making telephone call;Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper;Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), development resources: www.waveshare.com/wiki/SIM7600E_4G_HAT
  • 82,55 € EN AMAZON
LILYGO
LILYGO
LILYGO T-SIM7600G-H ESP32-WROVER 18560 - Soporte de batería de carga solar ESP32 TTGO placa de desarrollo
star

76

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#8

  • T-SIM7600 es un módulo de red inalámbrica con WIFI/Bluetooth/4G LTE CAT4 GPS
  • Sobre esta base, integramos un soporte de batería 18650 y añadimos una interfaz de carga solar
  • Con el fin de facilitar el uso de varios escenarios de aplicación, se reservan dos interfaces tipo T en la placa de desarrollo
  • Control de potencia GPS, reduce el consumo de energía, el más bajo alcanza 300 uA cuando duermes
  • Github.com/Xinyuan-LilyGO/T-SIM7600X
  • 67,00 € EN AMAZON
LILYGO
LILYGO
LILYGO T-SIM7600G-H ESP32-WROVER 18560 Soporte de batería de carga solar ESP32 TTGO placa de desarrollo
star

73

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#9

  • T-SIM7600 es un módulo de red inalámbrica con WIFI/Bluetooth/4G LTE CAT4 GPS
  • Sobre esta base, integramos un soporte de batería 18650 y añadimos una interfaz de carga solar
  • Con el fin de facilitar el uso de varios escenarios de aplicación, se reservan dos interfaces tipo T en la placa de desarrollo
  • Control de energía GPS, reduce el consumo de energía, el más bajo alcanza 300 uA cuando duermes
  • Github.com/Xinyuan-LilyGO/T-SIM7600X
  • 62,00 € EN AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H 4G DONGLE with Antenna,Supports Global Band,Industrial Grade 4G Communication and GNSS Positioning Peripheral with 50Mbps downlink Rate and 50Mbps uplink Rate
Envío gratis
star

65

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#10

  • This is a global band industrial grade 4G dongle, which features up to 150Mbps downlink rate and 50Mbps uplink rate, supports operating systems including Windows/Linux/Android. By simply connecting it to laptop, PC, Raspberry Pi, drone, industrial computer, or other IoT host device, it is easy to use 4G network connection on the go.
  • Global Band Support: Supports Global 2G/3G/4G Communication;GNSS Positioning:Supports GPS, BeiDou, Glonass, LBS Base Station Positioning; Industrial Grade 4G Solution:Integrates SIM7600G-H Module, Industrial Grade Design, Stable Connection, More Durable
  • Multi Host Support:Working With Laptop / Raspberry Pi / Industrial Computer...Flexible Antenna:Flexible Structure Antenna Design, Allows Multidimensional Rotation For Better Connection Up To 150Mbps Downlink And 50Mbps Uplink*
  • Multi System Support:Supports Windows/Android/Linux;Just plug it into USB port, go through some driver installation and simple configuration, the high speed 4G network connection would be ready to use; 4G SIM Card Slot:Onboard Nano SIM Card Slot With Sliding Cover, Easy To Use;
  • Cloud Communication:Supports USB/UART Communication Interfaces; Supports TCP/UDP/FTP/FTPS/HTTP/HTTPS Communication Protocols;Three LED Indicators:Easy To Check The Operating Status, Convenient For Programming/Debugging
  • 89,99 € EN AMAZON
h h h&h