Geekworm
Los 10 mejores productos de agosto de 2025
Última actualización:
22 de agosto de 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case with Active Cooler, Support Top PCIe to M.2 NVMe Adapter X1001 / X1004 / X1003 / X1012 / X1015 / X1000 / M901 / M300 (P579-H500)
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Compatibility】① for Raspberry Pi 5 with TOP PCIe to M2 NVMe shield like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN:B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), M901(ASIN; B0D179YJ9K) , X1000 (ASIN: B0CQ4NTZ7G) ②for separate Raspberry Pi 5 16GB/8GB / 4GB Motherboard
【Official Raspberry Pi 5 Active Cooler Included】Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5; Fan speed control: Pulse width modulation control with tachometer; Maximum airflow: 1.09 CFM; Maximum fan speed: 8000 RPM +/- 15%
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, etc.
【Packing List】1 x metal case with accessories (P579), 1x Raspberry Pi 5 Official Active Cooler;
【NOTE】NOT include Raspberry Pi 5, PCIe to M.2 NVMe SSD Shield, SSD or power adapter!!!
24,89 € EN AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
39,50 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 /X1015 / X1000 / M901 / M300 & Raspberry Pi 5 Active Cooler
Envío gratis
89
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1003 (ASIN: B0CSJZ7NSS), X1004(ASIN: B0D22JPQRB), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN: B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, PCIe to NVMe SSD Shield, M.2 NVMe SSD, Active Cooler, or power adapter!!!
√ P579 Case with Official Active Cooler, refer to ASIN: B0CT4P893Q;
12,96 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 UPS (X1202), 4-Cell 18650 UPS (MAX 5.1V 5A Output) with Wide 6-18V Input | Auto Power On | Safe Shutdown | Power Loss Detection
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1202 is designed to be attached on bottom, enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A (Recommend 12V 5A 60W PSU ASIN: B0BD81W6SN); OR power via USB-C port of X1202: 5Vdc 5A via USB Type-C (Recommended 5V 5A USB-C power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1202 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case(NOT included)】Refer to X1202-C1 (ASIN: B0D4ZBXGSH)
60,89 € EN AMAZON
Geekworm
Geekworm X1201 Ultra-Thin 18650 UPS Shield for Raspberry Pi 5, with MAX 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
【Compatibility】 for Raspberry Pi 5 16GB / 8GB / 4GB
【Function】X1201 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile & Ultra-thin Design】X1201 is designed to be attached on bottom, and expand the battery holders horizontally, which is ultra-thin and enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via X1201 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1201 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1201-C1 Case (ASIN: B0D4Z92TBB)
57,89 € EN AMAZON
Geekworm
Geekworm KVM-A3 Kit KVM sobre IP para Raspberry Pi 4
Envío gratis
79
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【What is it】This is a kit provides a KVM Over IP solution based on Raspberry Pi 4
【Compatiblity】Only compatible with Raspberry Pi 4.
【Function】Remotely turn on/ turn off / restart your computer; configure configure the UEFI/BIOS; reinstall the OS using the Virtual CD-ROM or Flash Drive; remote use your keyboard and mouse; Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc
【How to Power】Power via USB-C port of X630-A3; Recommend 5V 4A 20W PSU: ASIN B09J4V3RYK
【How to Cool】X630-A3 comes with a cooling fan to cool the raspberry pi, also supports 7mm heatsink on raspberry pi
【What Included】X630 HDMI to CSI-2 Board (for video capture), X630-A3 HAT Board (for ethernet, cooling, RTC, power in etc), X630-A5 Adapter Board (it is installed inside the PC case, connecting the computer motherboard and IO panel cabe of PC case), 0.96 inch OLED (for display, Resolution: 128×64 pixel), Ethernet Cable (TIA/EIA-568.B connection, and it's ATX control signal cable)
【Extra Needed】Raspberry Pi 4, TF Card, HDMI Cable, Power Adapter
84,89 € EN AMAZON
Geekworm
Geekworm NASPi V2.0 2.5 "SATA HDD/SSD NAS Kit de Almacenamiento para Raspberry Pi 4 Modelo B
Envío gratis
75
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
【NASPi V2.0 2.5" SATA Case】Used for raspberry pi 4 with a 2.5 inch SATA HDD/SSD. (Dual 2.5" SATA Board with Case refer to NASPi Gemini: ASIN B07VXF2HJG)
【Function】NAS Storage, Safe Shutdown, Auto Power On, PWM Fan
【Packing List】X823 storage shield *1, X-C1 V2.0 adapter board*1, 4010 PWM cooling fan with X823-A3 metal fan bracket*1, aluminum case*1
【How to Power】5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1), Recommend Geekworm 20W 5V 4A USB C power adapter (ASIN: B09J4V3RYK)
【Supported Hard Disk Thickness】NASPi supports SSD with a thickness Max. 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thick. HDD/SSD is not included
【Script for PWM fan】Refer to: wiki.geekworm.com/X-C1_Software. If the fan does not work in third-party OS, only remove the jumper on 'Fan FS' of X-C1 to let the fan run at full speed
【Wifi description】5G WiFi is stable enough, recommend using Ethernet or 5G WiFi
62,89 € EN AMAZON
Geekworm
Geekworm X1202-C1 Metal Case for Raspberry Pi 5 & X1202 UPS Shield
Envío gratis
73
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Funda para Raspberry Pi 5 UPS: X1202-C1 carcasa metálica para Raspberry Pi 5 y X1202 UPS (ASIN: B0CRTRQNG9), soporte activo de instalación del refrigerador
【Soporte apilable TOP Raspberry Pi 5 PIP Shield】Espacio reservado en la parte superior para montar PIP PCIe to NVMe Shield en la parte superior de Raspberry Pi 5. Para ejemplo: X1001 (ASIN: B0CPLF6JYX) / X1003 (ASIN: B0CSJZ7NSS) / X1004 (ASIN: B0D22JPQRB) / X1000 (ASIN: B0CQ4NTZ7G) / M901 (ASIN: B0D111) 79YJ9 K
Colocación precisa del orificio: fácil de insertar y quitar la tarjeta SD, fácil acceso al botón de alimentación X1202
Montaña de pared: con agujero de montaje VESA, puedes colgarlo en la pared o en cualquier lugar que desees
Dimensiones de la caja: 100 x 90,8 x 62,8 mm
Lista de embalaje: 1 funda metálica X1202-C1, 1 paquete de tornillos
19,50 € EN AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
17,50 € EN AMAZON
geekworm x1002
geekworm x1009
geekworm raspberry
geekworm x728
geekworm naspi
geekworm p579
geekworm p580
#1 GANADOR
