Geekworm X1009
Los 10 mejores productos de mayo de 2025
Última actualización:
22 de mayo de 2025
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
39,50 € EN AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
97
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0CTDPVNR6), or P580-V2 (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
17,50 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579-V2) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 / M400 & Raspberry Pi 5 Active Cooler
Envío gratis
91
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1003 (ASIN: B0CSJZ7NSS), X1004(ASIN: B0D22JPQRB), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN: B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, PCIe to NVMe SSD Shield, M.2 NVMe SSD, Active Cooler, or power adapter!!!
√ P579 Case with Official Active Cooler, refer to ASIN: B0CT4P893Q; √ P579 Case with H501 Active Cooler, refer to ASIN: B0D5LCJQZ5
12,96 € EN AMAZON
Geekworm
Geekworm X1005 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, Supports Hailo-8 AI Accelerator
Envío gratis
84
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
【Compatibility】Raspberry Pi 5 Dual NVMe Hat only compatible with Raspberry Pi 5, Model: X1005
【Support Dual M2 NVMe SSD with multiple length】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
【 Raspberry Pi 5 AI Hat Extension】 Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
【 Support NVMe Boot】 Supports NVMe boot with eeprom 2024/05/17 and later version
【How to Power】 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP8SRXSC) or (ASIN:B0CZCZF2QV)
【Packing List】1 x X1015 PCIe Peripheral Board, 2x 40mm PCIe FFC Cable(One as backup), 1x GPIO Header, 1x Screws Pack (Note: not include Raspberry Pi 5, SSD, TF card or power adapter.)
【Matching Case (NOT include)】Refer to P580-V2 Case (ASIN: B0D99HVX3C). NOT compatible with P580!
39,50 € EN AMAZON
Geekworm
Geekworm X1003 PCIe M.2 NVMe SSD Pip PCIe Peripheral Board Top for Raspberry Pi 5 & Active Cooler
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
【Compatibility】Only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB with official active cooler【IMPORTANT NOTE】X1003 MUST use with Raspberry Pi 5 official Active Cooler
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242 length installation. (Do not reserve the nut column to fix the 2230 SSD) 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1003#Important_Notes
【How to Power】Can power the X1003 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power) Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1003 PCIe Peripheral Board, 1x Screws Pack Accessories
【Matching Case (NOT included)】Refer to P579 (ASIN: B0CRB3DT5M); Or P579 Case with Active Cooler (ASIN: B0CT4P893Q); Or Argon NEO 5 Case (ASIN: B0CR1JPCM7); Or P425 ABS Case (ASIN: B0CYQ3T5DF); Or Raspberry Pi 5 official ABS case
15,50 € EN AMAZON
Geekworm
Geekworm KVM-A8 PCIe versión para Raspberry Pi 4 Model B KVM Over IP
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【What is it】This is a kit providing a KVM over IP solution for Raspberry Pi 4 8GB/4GB/2GB, which can control a computer using a web browser!
【Compatibility】for use with Raspberry Pi 4 Model B 8GB / 4GB / 2GB / 1GB only (not support RPi 3)
【Function】remotely turn on/turn off/restart your computer; configure the UEFI/BIOS; reinstall the OS using the Virtual CD-ROM or Flash Drive; remote use your keyboard and mouse; Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc.
【How to Power】POE Power (recommended), or DC 5V3A PSU power via USB-C port of X630-A8 (Refer to ASIN B09J4V3RYK)
【How to Cool】X630-A8 comes with an active cooling fan to cool the raspberry pi
【What included】1 x X630 HDMI to CSI-2 modules, 1 x X630-A8 expansion board and other accessories, refer to the packing list picture for details
【Extra needed (not included)】Raspberry Pi 4, TF card, power adapter (only requires it if no POE power)
100,89 € EN AMAZON
Geekworm
Geekworm X1202-C1 Metal Case for Raspberry Pi 5 & X1202 UPS Shield
Envío gratis
76
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Funda para Raspberry Pi 5 UPS: X1202-C1 carcasa metálica para Raspberry Pi 5 y X1202 UPS (ASIN: B0CRTRQNG9), soporte activo de instalación del refrigerador
【Soporte apilable TOP Raspberry Pi 5 PIP Shield】Espacio reservado en la parte superior para montar PIP PCIe to NVMe Shield en la parte superior de Raspberry Pi 5. Para ejemplo: X1001 (ASIN: B0CPLF6JYX) / X1003 (ASIN: B0CSJZ7NSS) / X1004 (ASIN: B0D22JPQRB) / X1000 (ASIN: B0CQ4NTZ7G) / M901 (ASIN: B0D111) 79YJ9 K
Colocación precisa del orificio: fácil de insertar y quitar la tarjeta SD, fácil acceso al botón de alimentación X1202
Montaña de pared: con agujero de montaje VESA, puedes colgarlo en la pared o en cualquier lugar que desees
Dimensiones de la caja: 100 x 90,8 x 62,8 mm
Lista de embalaje: 1 funda metálica X1202-C1, 1 paquete de tornillos
19,50 € EN AMAZON
Geekworm
Geekworm X306 V1.3 Ultra-Thin UPS Shield for Raspberry Pi Zero 2 W
Envío gratis
71
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
【Update】Updated to V1.3 in July 2024. 1. Only compatible with Raspberry Pi Zero 2W；2. Removed 3 standard USB-A 2.0 ports；3. Removed 4-pin header for external power switch and always-on power option; 4. Smaller size, simplified use
【Compatibility】Compatible with Raspberry Pi Zero 2 W ONLY
【Ultra-thin UPS】Ideal uninterruptible power supply (USP) solution for Raspberry Pi Zero W/2 W, max. 5.1 V, 4000 mA power backup with single cell battery holder
【How to Power】Power via USB-C 5V Power In port of X306; 5Vdc +/-5% , ≥3A; Recommended Geekworm 5V 4A 20W USB-C power supply(ASIN: B09J4V3RYK)
【How to cool】Recommended for use with C296 aluminium heat sink (ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W.
【Packing List】1 x X306 Expansion Board; 4 x M2.5x5mm Screws; Note: not inlcude Raspberry Pi board, battery, GPIO Header & power adapter.
28,00 € EN AMAZON
Geekworm
Geekworm X1205-C1 Metal Case for Raspberry Pi 5 and X1205 UPS and Active Cooler and X1001/X1003/X1004/X1015/M901/X1000 PCIe Top
Envío gratis
67
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
UPS Case for Raspberry Pi 5: Metal Case for Raspberry Pi 5 and X1200 UPS ONLY, support active cooler and top PCIe board installation, modelo: X1205-C1
Support Stacking TOP Raspberry Pi 5 PCIe Adaptador: Space reserved for mounting TOP PCIe to NVMe Shield above Raspberry Pi 5. Such as X1001/X1004/X1003/X1000/X1015/M901
Dimensiones de la caja: 91 x 76 x 64 mm
Colocación del agujero preciso: fácil de insertar y quitar la tarjeta SD, fácil acceso al botón de alimentación X1205
Montaña de pared: con agujero de montaje VESA, puedes colgarlo en la pared o en cualquier lugar que desees
Lista de embalaje: 1 x X1205-C1 Metal Case, 1 x Screws Pack; NO incluye Raspberry Pi 5, batería, X1205 UPS, o PCIe to NVMe Shield
19,00 € EN AMAZON
geekworm
#1 GANADOR
